Initiate Registration Mode on the Base Station
Press and hold the Wireless button on the base station for approximately 5 seconds, until the registration LED begins to flash. This indicates the base station is ready for registration

.

Start the Registration Process on the Handset
On the handset, press the OK soft key to proceed. Navigate to settings and the Register Handset option or “Registration” and select it by pressing the OK soft key

.

Choose a Base Station
Select the desired base station number from the list and press OK.
The handset will begin searching for the selected base station. 

Once the base station is found, press the OK soft key to confirm the connection.

Enter the Base PIN
When prompted, enter the base PIN code (default is 0010) and press the Done soft key to complete the registration process.

Note: If the default PIN does not work or has been changed, contact our support team by opening a support request via email to voipsupport@sherweb.com, via our website by selecting Technical Support ­> CloudPBX or by calling 1.888.567.6610 using option 2 for Support and then option 5 for CloudPBX.